Model M2 comes - as Model M3

After almost two years of development work and four dry runs, it is now almost done - and it was worth going the extra mile to finish. Model M2 becomes Model M3 In the course of development, one thing became clear: it has to be four ways! The step up in size and performance should also be reflected in the name here and leave room for another gap in the portfolio that can be closed in the future. Hence Model M3. Why four ways? The division into more than three ways became necessary because the integrated subwoofer unit was realised as a self-sufficient 2-way system and therefore the midrange was designed separately. This was the only way to simultaneously meet the quantitative (level) and qualitative (midrange) requirements we had set ourselves. Multi-way subwoofer From 200 Hz downwards, two 10-inch long-throw subwoofers take over, which are controlled completely separately via FIR filtering. This way, different cardioid dispersion variants can be created in the bass range. At the start, a tuning with rear sound cancellation at 180°, i.e. with the zero (null) exactly behind the speaker, will be available. Full effectiveness and thus constant dispersion is achieved from 35 Hz. Preliminary specs:

• 4-way floorstanding speaker, 1-inch compression driver, 8-inch bass-midrange driver and 2x 10-inch subwoofer
• Integrated 2-way bass reflex subwoofer front/rear with cardioid dispersion
• Shallow waveguide with 140 x 100° radiation pattern, constant directivity from 35 Hz (cardioid mode)
• maxSPL 125 dB, Latenz <8 ms, Bass ab 25 Hz @-6 dB, THD <0,1 % (150 – 1500 Hz @90 dB), phasenlinear >80 Hz
• Resonance- and noiseless bass reflex ports
• All electronics fully integrated into the housing, encapsulated and passively cooled
• Two amplifier configurations available with 1000 W (M3) and 1500 W (M3 S)
• Dimensions 1286 x 499 x 199 mm